2
\$\begingroup\$

I'm starting out a 2D wrestling game in Unity 5 and i need some help. The default resolution of game needs to be 320x240. The background sprite that i would be using is 640x480. The camera would move over the background to give it a hovering look. I want the Camera to cover exactly 320x240 resolution. I tried setting the Camera size to 1.2 and it looks approximate but i wanna be sure that the camera is exactly 320x240. By default all the images are set to 100 Pixels per Unit.

So my question is:

  • How to set the camera to cover exactly 320x240
\$\endgroup\$
  • \$\begingroup\$ Hello and welcome to gamedev stack exchange! Please limit your questions to a single question. I edited your question to remove your second question. Please create another question with your second question :) Questions? \$\endgroup\$ – Alexandre Vaillancourt Jul 27 '15 at 15:47
  • \$\begingroup\$ different question technically, but you want these answers gamedev.stackexchange.com/questions/75376/… \$\endgroup\$ – jhocking Jul 27 '15 at 18:55
1
\$\begingroup\$

I had the very same question while while starting out. Do take a look at the detailed answer I later posted. How does Unity size graphics

When we set camera size, there's a certain screen height. This height is fixed irrespective of the device screen. On larger devices, greater detail, on smaller devices, lesser detail. So, if I chose 760px as height of my background image, I calculate camera size as follows: cameraSize= (Height/2)/PixelsPerUnit which in my case is, (760/2)/100=3.8

Next, I need to make sure skybox doesn't show irrespective of the device's screen size. This means, design background for the widest aspect ratio which is 16:9. So, I calculated the width as

width=AspectRatio X height. Which in my case is (16/9) X 760=1352 px.

So my background is 1352 X 760 pixel. This fits 16:9 aspect ratio perfectly. On narrower ratios like 4:3, there is cropping towards the sides. But skybox never shows. Which was my main issue.

\$\endgroup\$
0
\$\begingroup\$

Set your Pixel per Unit to 1 and try witch this:

scale = Screen.height / nativeRes.y;
        pixelsToUnit *= scale;
        cam.orthographicSize = (Screen.height / 2.0f) / pixelsToUnit;

Where nativeRes is your default resolution. Attach it to MainCamera and now your orto size should fit automatically.

\$\endgroup\$
  • 1
    \$\begingroup\$ But setting PPU to 1 would be bad for performance & physics right? Any solution with default value of PPU that is 100? \$\endgroup\$ – Jaspreet Singh Jul 27 '15 at 17:47
  • \$\begingroup\$ If you work with pixelart just change FilterMode to Point and set format as a truecolor. Now your sprites should looks sharp. \$\endgroup\$ – MaD Jul 27 '15 at 20:19
0
\$\begingroup\$

Your orthographic camera size depends on the pixels per unit of your sprites.

Orthographic camera size is equal to 1/2 of the vertical units (meters if you use built in physics) you will see on the screen. Say size 6 means that your screen height will be 12 units.

The formula is: screen resolution / 2*orthographic size = pixels per unit on sprites

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.